4 Ways Plumbers Can Help You

Sewerage systems are used in both residential homes and commercial buildings. These sewerage systems ensure the discharge of liquid wastes and maintain proper cleanliness. However, sometimes, there can be some leakage or blockage in the leverage pipes that will cause inconvenience and property damage.

Therefore, plumbing services are available to solve such sewerage issues. Plumbing services deal with sewer problems in several ways, such as given below:

1. Trenchless Sewer Pipe Repair

The most innovative way to change or repair old or damaged pipes is through trenchless sewer pipe repair. The benefit of this type of repair is that we don’t have to dig a lot. In this technique, a small camera is sent into the pipes to analyze the place and extent of damage. Then, we will have two options to deal with the damaged part.

  • Pipe Bursting

It is a trenchless technique that involves the installation of a bursting head attached to a new pipe into the damaged pipe. The bursting head will split and expand the old pipe, and the new flexible pipe will be installed simultaneously.

It is used mainly in the buried pipes of water, natural gas, and sewerage.

  • Pipe Lining

It is another trenchless technique through which you can treat sewerage problems without any destruction or disruption. Following are the steps to treat the corroded or damaged pipes through pipe lining:

  1. Clean the pipe as much as possible. Remove the garbage from the pipe using a mechanical cutter.
  2. A felt liner with epoxy is installed in the pipe with a rubber bladder. The rubber bladder will be inflated, and the liner will touch the pipes’ walls. This epoxy will adhere the liner to the pipe.
  3. The rubber bladder is removed, and the pipe will have a new inner lining.

In this way, plumbing services solve drainage problems without trenching.

2. Tankless Water Heater Unit Repair

You can face several issues in tankless water heaters, such as:

  • Air supply or exhaust blockage
  • Mineral buildup
  • No hot water
  • Flame failure
  • Leakage
  • Low water pressure
  • Discolored water
  • Unpleasant water odor

In such cases, you need a Tankless Water Heater Unit Repair. You can solve these issues through the following ways:

  • Resetting the heater
  • Inspecting the thermostat
  • Flushing the sediments
  • Checking the leaks
  • Cleaning the water inlet filter

3. Running Toilet Repair

Running toilets waste a lot of water. There are several causes of running toilets. Some of them are given below:

  • Damage flapper
  • Long refill tube
  • Overflow tube
  • High water pressure
  • Broken parts in the toilet

Repairing the running toilet is not a big deal. You should check the entire toilet and tighten the loose parts. However, if there is any damaged or broken part, replace it with a new one.

4. Leaked Sink Repair

There are a number of sink problems, such as clogs, backups, leaks, nasty smells, etc. However, the main issue is leakage in the sink. Leaks can occur at several points, like in sink faucets, spray hoses, sink strainers, drain pipes, etc.

Check all the parts of the sink keenly and see where the leakage is. Then, you can either tighten that part or change it with a new one, depending on the extent of damage.

- Advertisement -